ελληνική μουσική
333 online   ·  209.037 μέλη

Πως να ρυθμίσετε την τύπου Gibson κιθάρα σας, για να ακούγεται σαν Gibson

Apostolidis
Περαστική Νότα
Chat
11.12.2009, 11:19

Ξέρω οτι πολλοί από εσάς έχουν περάσει ατέλειωτες ώρες προσπαθώντας να ρυθμίσουν την κιθάρα τους, έτσι ώστε να έχουν τον καλύτερο δυνατό ήχο. Επειδή έχω περάσει κι έγώ αυτό το λούκι, αποφάσισα να ποστάρω κάποιες αλλαγές και ρυθμίσεις που προτείνει ο καλύτερος ίσως τεχνικός στον κόσμο, Dan Erlewine, σε αντίστοιχη ερώτηση που του έγινε, για την καλύτερη δυνατή ρύθμιση μιας "τύπου" Gibson κιθάρας.


On StewMac's tech support line, folks ask me how to soup-up inexpensive guitars. The question is, "How do I turn this budget guitar into a more serious player?

Looks good, feels good... Now it sounds good!

Here's a budget-priced Les Paul copy. It's shiny and new, and plays well, but the owner wants to modify it to make it more like a vintage Les Paul. My advice: the first dollar he spends should go toward what has the most effect on the tone. We decided to scoop out the insides: replacing the wiring and pickups.

Step 1: New wiring

Cheap pots and switches are common on low-price guitars, and we often see pickups that are way overwound. Usually they have ceramic bar magnets, and sound too thin and bright Β— without clarity and punch. They sure don't have the warm sound that this Guy was looking for when he chose a Les Paul style guitar.
The first step was to rewire it with better components, using a Les Paul wiring kit.

Here's a really handy tip:
Cut a piece of cardboard in the shape of the control cavity, and poke holes for the control pots. Hold the pots this way while you work, and your pre-wired circuit will drop right in place! (It's soooo much easier than trying to wire things up when they're sunken down in the control cavity!)

Step 2: New pickups

Once the controls were wired, I installed a set of Golden Age zebra coil pickups . These pickups are designed to match the original humbucker specs, including AWG42 coil wire and Alnico 5 magnets Β— they've got the vintage tone this customer's looking for.

Before stringing up the guitar, I adjusted the pickup polepieces in the same way Gibson did back in the 50's. (Thanks to Phil Jones for telling about this on page 116 of Dan Erlewine's book, How To Make Your Electric Guitar Play Great!)

I used an understring radius gauge to find the radius of the fretboard......then traced that radius in pencil onto an index card. I cut the card with a scissors to get a tiny, pickup-size radius gauge that fits right down on the polepieces.

Το link παρακάτω, είναι ένα pdf που αν τυπωθεί σωστά (όχι shrink to fit στο print setup) δημιουργεί 2 radious gauges με διάφορες ακτίνες για κάθε τύπο κιθάρας)

http://www.google.gr/url?sa=t&source=web&ct=res&cd=1&ved=0CAkQFjAA&url=http%3A%2F%2Fwww.pickguardian.com%2Fpickguardian%2FImages%2FPickguardian%2520Neck%2520Radius%2520Gauges.pdf&rct=j&q=pickguardian+neck+radious&ei=UwwiS5DwJ4z7_AbO77WyCg&usg=AFQjCNH8Zx_5m0kFlSsySXPb8xE5OrRWJA


The idea is to drop the two outside polepieces down until they're flush with the surface of the pickup, then adjust the four poles in between to follow the fretboard radius.

Phil Jones says: "When you raise the middle polepieces to a 12" radius, you end up with screw slots in an almost perfect zig-zag pattern from side to side."

He's right: that's what I got. After doing this to both pickups, you can string the guitar up and set the action (string height).

Here's how to set
the pickup height:
String up the guitar, and press the low and high E strings down onto the last fret (nearest the pickups). Measure between the bottom of the E strings and the polepieces. Adjust the neck pickup for a 1/16" gap; set the bridge pickup to 3/32". You might alter it a little depending the technique of the player.



That's all it takes. This guitar sounds way better now, with only a little investment. Just for fun, we might do some more upgrades to this Les Paul clone. If we do, we'll tell you about it in a future Trade Secrets!


Problem-solving products mentioned above:


Wiring Kit for Les Paul
Complete package of all the parts to wire a guitar or bass with two volume controls, two tone controls, and a selector switch. Two versions available: with standard control pots or long-shaft pots to fit Les Pauls.
How To Make Your Electric Guitar Play Great!
Dan Erlewine's latest book on set-up and maintenance for beginners and professionals. Book includes many new set-ups of the pros like Eric Johnson, Chris Duarte, Dave Hole, Junior Brown, and many more...
Golden Age Pickups
The vintage look and the sound you want! Designs inspired by the great guitar pickups of the 50s. For Strat, Les Paul, and similar guitars. (Pictured: nickel cover Golden Age humbucker.)

Long shafts $48.56

$19.95
New! Zebra $39.55

To reply to this email, please use this web page: stewmac.com/email
Our customer service representatives are available to serve you
9am-6pm weekdays EST. Call 800-848-2273 today.



Stewart-MacDonald - Everything for building and repairing stringed instruments!

Β© 2006 Stewart-MacDonald, 21 N. Shafer Street, Box 900, Athens, Ohio 45701

Toll-free: 800-848-2273 Website: www.stewmac.com E-mail: www.stewmac.com/email


#1   
Apostolidis
Περαστική Νότα
Chat
11.12.2009, 11:43

Η εργοστασιακή ρύθμιση για το Action μιας ηλεκτρικής Epiphone είναι Ε (bass side) 6/64'' και Ε (treble side) 4/64''. Η αντίστοιχη ρύθμιση για μια Gibson είναι Ε (bass side) 5/64'' και Ε (treble side) 3/64''.

 


#2   


Αυτά τα διάβασες;